一级毛片视频资源网_欧美午夜精品一区二区三区电影_亚洲制服人妻综合av_晚上看羞羞视频免费_欧美另类亚洲制服丝袜_把腿张开老子臊烂你的在线观看_国语露脸刺激高清AV_在线观看动漫av资源_无码视频 人妻系列_国产亚洲欧美一级黄色影片

Polyurethane foaming machine has a wide range of applications in many fields, so in the foaming process, rigid polyurethane foaming machine often appear what problems?

I. collapse of rigid polyurethane foaming machine, which mainly has four reasons:

1. Leakage or failure, tin catalyst can increase the material.

2. Large acid value of raw materials.

3. The rate of foaming gas production reduces the amount of amine catalyst materials that can be solved.

4. Failure of composite stabilizer or addition of alkaline catalyst.

II. It is found that rigid polyurethane foam will be thick, which is caused by:

1. Compound stabilizer, leakage or failure.

2. Foaming agent or polyether in too much water.

3. The mixture is not evenly mixed.

4. Low purity of materials, high flow rate ratio of total chlorine and acid.

5. Gel speed.

III. During the foaming process of polyurethane spraying machine, a series of problems such as foam shrinkage, crisp, too soft, heartburn, cracking, smoking, falling off, caving, thick foam hole, kneeching into a fine powder, slow foaming at the beginning of reaction, slow inspiration, etc. When the above situation happens, workers should not panic, take the right medicine and find out the cause of the problem.